Home
>
Epson Printers
>
Direct-to-Garment Printing
>
DTF Supplies
>
Ecofreen DTF Hot Peel Film
>
Ecofreen Transfer Film for Direct to Film (Hot Peel DTF) 8.5" x 11" 200 Sheets
|
Ecofreen Transfer Film (Hot Peel) for Direct to Film (DTF)
Process:
- Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
- Apply EcoFreen powder evenly and remove the excess powder. Advise using a shaker machine or medium tub with proper PPE.
- Hover with a heat press to bake the hot melt powder. 330°F, 3-5 min depending on the setting you have chosen for your graphic design. Or use a curing oven (265-285°F, 2min).
- Transfer the image by heat press at 330°F for 10-15 sec with medium pressure.
- Remove the film gently within 5-10 seconds after heat pressing. Advised to run a tool or gloved hand over the finer details of the graphic design before removing the film.
- Heat press again at 330°F for 5-10sec with medium pressure to enhance softer hand feel and to improve washing durability.
There have been no reviews