Ecofreen Hot Melt Powder for Direct to Film (DTF) 1lb

Crucial for direct to film (DTF) process (otherwise known as DTG Transfer). Ecofreen Hot Melt Powder acts like the glue to your print and your material!

Features:

• After baking the powder, solid white for more vibrant colors. Even and regular particles for the fin quality of graphic and good adherence. Finely coated film for no pinholes!

Hot Melt Powder for DTF:

• 1 lb
• 1 kg
• 25 kg

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply EcoFreen powder evenly and remove the excess powder. Advise using a shaker machine or medium tub with proper PPE.
3. Hover with a heat press to bake the hot melt powder. 330°F, 3-5 min depending on the setting you have chosen for your graphic design. Or use a curing oven (265-285°F, 2min).
4. Transfer the image by heat press at 330°F for 10-15 sec with medium pressure.
5. Remove the film gently within 5-10 seconds after heat pressing. Advised to run a tool or gloved hand over the finer details of the graphic design before removing the film.
6. Heat press again at 330°F for 5-10sec with medium pressure to enhance softer hand feel and to improve washing durability.